Just few hours ago, our mDrawbot is up on Makuake in Japan. And we achieved 10 % ofour goal in just one hour. Why can our mDrawbot be so charming? mDrawBot kit can be assembled into any of the 4 different configurations:
mScara is a SCARA (Selective Compliance Articulated Robot Arm) driven by stepper motors.
If you install a pen onmScara, it can draw pictures on a flat surface. Replacing the pen with a laser diode, it can turn into a desktop laser engraver.
mSpider is a drawing robot which can draw pictures on a wall or a white board.
Two stepper motors control the movement of mSpider though strings. Theoretically, it can draw in a huge range by increasing the length of strings.
mEggBot is designed to draw on things that are improbable to print on, such as eggs or ping pong balls. It can be used to write letters or to draw expressions on eggs, or to draw Easter eggs.
mCar is a three-wheel robot car. It contains two stepper motor drive wheels and a ball caster wheel.
It can draw its own movement tracks on the surface. If you install a chalk instead of a pen, it can draw on the floor.
Except 4 cool configurations above. We also have
–a powerful software designed for mDrawBot. Which helps reduce the difficulty of drawing.
The most important reason is, mDrawbot, is from MakeBlock.
So, just come and support us!